More golf at home, with gear selected to fit your setup.

Good Round Field Notes

Garage Golf Simulator and Practice Net Setup Guide

by Good Round Supply

A garage golf simulator or practice net starts with the same constraint: the clear space left after accounting for the golfer, full swing, doors, tracks, lights, storage, and ball path. Choose a practice net when you primarily need ball containment. Choose an impact screen and enclosure path when you also want a projected simulator image.

Measure your golf simulator room dimensions before choosing the net or enclosure, including usable height, width, depth, and garage obstructions.

Choose your garage setup before comparing products

First decide whether you want to practice into a net or project a simulated course. Both need clear swing space; a screen is not necessary just to practice golf.

Check my garage dimensions. Measure beneath door tracks and open doors, include the hitting-surface height, and decide where the equipment will be stored when you park a car. Do not choose a larger net based only on wall-to-wall width.

If you want the fastest route, use the three setup paths below. Product prices and availability can change, so follow the product links for current details.

Three practical garage setups

Compact garage

Start with the Mini Golf Practice Net, which has a manufacturer-listed frame size of 5 feet wide by 6 feet high by 3 feet 6 inches deep. Choose the Mini Golf Practice Package when its listed mat and containment components cover more of what you need.

This is the smallest frame in the current lineup, but you still need enough clear space in front for the golfer and a full swing. A compact frame does not make a low ceiling or obstructed swing area safe.

Balanced home garage

Start with the Home Golf Practice Net, with a 7-foot-wide by 7-foot-high by 3-foot-6-inch-deep frame. The Home Golf Practice Package is the more complete starting point. Choose the Home No Fly Zone Golf Package when your measured setup calls for the package's listed overhead coverage.

Wider practice area

Start with the Pro Golf Practice Net, with an 8-foot-wide by 7-foot-6-inch-high by 3-foot-6-inch-deep frame, or compare the larger Pro 8, Pro 9, Pro 10, and Pro XL frames in our complete golf net comparison.

The Pro Golf Practice Package adds the listed package components. The Pro No Fly Zone Golf Package is the stronger starting point when your room needs compatible overhead containment.

Practice net or projected garage golf simulator?

A practice-net setup needs a suitable net, hitting and stance surface, containment for expected misses, and enough clear space to swing. It can be the simpler option when you want to practice contact and ball striking without projection.

A projected garage golf simulator adds an impact screen, enclosure or room-protection plan, launch monitor, projector, computer or supported device, software, cables, power, lighting control, and ventilation. The complete system must also leave the garage usable for its other purposes.

Start with our golf simulator screens and enclosures guide and complete simulator package checklist if you want projected play. Use the free setup check if you want a second review of the room and proposed equipment before ordering.

Measure the garage before choosing a net

Record these measurements with vehicles and stored items in their normal positions:

  1. Clear ceiling height: Measure to the lowest obstruction, including an open garage door, tracks, opener, lights, rafters, and storage.
  2. Clear width: Measure the space that remains after shelves, cabinets, doors, and parking needs.
  3. Clear depth: Include the net frame, the golfer's position, club travel, and walking space.
  4. Swing clearance: Have every intended golfer make slow practice swings with the longest club they expect to use. Do this without a ball.
  5. Ball path and misses: Consider right- and left-handed golfers, shanks, high shots, and the distance from the hitting position to the net.
  6. Floor and surroundings: Note concrete, slopes, drains, windows, vehicles, finished walls, and anything that needs protection.

The listed net dimensions describe the frame. They are not total room requirements or a guarantee that a golfer can swing safely in that space. Use our golf simulator room measurement guide for a more detailed worksheet.

Decide between net only and a package

Choose net only when you already have a suitable hitting and stance surface and have planned any required side or overhead containment.

Choose a package when its current included components match more of your shopping list. Package contents differ by model. Review the exact product page before ordering rather than assuming every package uses the same mat or protection.

For a component-by-component checklist, open our golf net and mat setup guide.

Plan side and overhead protection

A center strike is only one possible shot. Handedness, skill, shot pattern, golfer-to-net distance, and room layout all affect containment.

No accessory replaces adequate clearance, correct assembly, or a room-specific safety check. Confirm compatibility with your exact net and variant.

Check the garage details people often miss

  • Confirm whether the overhead door must be open or closed while you practice.
  • Keep the hitting area dry, level, and free of loose objects.
  • Use a stance surface that does not slide on concrete.
  • Confirm that the hitting surface and stance area place your feet and ball at suitable heights.
  • Plan lighting so the golfer can see the ball without placing fixtures in the swing path.
  • Consider noise and vibration if the garage shares a wall or ceiling with living space.
  • Decide where the net, mat, clubs, and accessories will go when the garage is used for parking.

Garage golf net checklist

  • [ ] The selected frame fits inside the measured clear width, height, and depth.
  • [ ] Every golfer has tested a slow full swing with the longest intended club.
  • [ ] Door tracks, openers, lights, vehicles, shelves, windows, and walls are outside the swing and ball paths.
  • [ ] The hitting and stance surfaces are stable and compatible.
  • [ ] Side and overhead containment match the room and expected misses.
  • [ ] The exact model, variant, package contents, and accessory compatibility have been checked.
  • [ ] The setup can be assembled, used, and stored without blocking required access.

Before ordering

Use the golf net comparison to compare every frame, then open the current product page for package contents, availability, shipping, and delivery estimates.

Request an eligible return within 30 days of delivery. The product must be unused, unassembled, uninstalled, and in its original packaging. For an ordinary return, the customer is responsible for return shipping and a 15% restocking deduction applies. Contact Good Round Supply before opening or assembling the product if you believe it may need to be returned.